LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Front Wheel Drive Shaft Joint Boot Shield Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Wheel Drive Shaft Heat Shield
    GM1631770Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheel drive shaft heat shield-to-transaxle mount bracket bolt.
  3. Remove the drive shaft heat shield-to-engine block bolt.
  4. Remove the wheel drive shaft heat shield.
scientia non olet · About LEMON Manuals