Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Floor Console Center Extension Screw | 2 N.m | 18 lb in |
| Front Floor Console Nuts | 2 N.m | 18 lb in |
| Front Floor Console Trim Plate Screws | 2 N.m | 18 lb in |
| Instrument Panel Center Compartment Screws | 2 N.m | 18 lb in |
| Instrument Panel Center Support Bracket Screws | 2 N.m | 18 lb in |
| Instrument Panel Cluster Trim Plate Bezel Screws | 2 N.m | 18 lb in |
| Instrument Panel Compartment Dampener to Compartment Screw | 2 N.m | 18 lb in |
| Instrument Panel Compartment Latch Screws | 2 N.m | 18 lb in |
| Instrument Panel Compartment Striker Screws | 2 N.m | 18 lb in |
| Instrument Panel Retainer Bolts/Screws | 2 N.m | 18 lb in |
| Instrument Panel Tie Bar Assembly to Body Bolts | 25 N.m | 18 lb ft |
| Instrument Panel Tie Bar Assembly to HVAC Module Bolts | 4 N.m | 35 lb in |
| Instrument Panel Upper Trim Pad Screws | 2 N.m | 18 lb in |
| Knee Bolster Reinforcement Bolts | 2 N.m | 18 lb in |
| Knee Bolster Screws | 2 N.m | 18 lb in |