LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> HHR LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Exhaust >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Inspect the CMP sensor for damage, replace as necessary.

  1. Lubricate the CMP sensor O-ring seal with clean engine oil.
  2. Install the CMP sensor. Intake CMP shown, exhaust CMP similar.
    CAUTION:

    Refer to Fastener Caution .

  3. Install the CMP sensor bolt.

    Tighten 

    Tighten the bolt to 10 N.m (89 lb in).

    4. Fig 2: CMP Sensor Electrical Connector
    GM1639712Courtesy of GENERAL MOTORS COMPANY
  4. Connect the exhaust CMP sensor electrical connector (1).
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals