LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cutaway 6.6 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information & Procedures >> DTC B2745 >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 GMC Savana Special, 2010 GMC Savana Camper Special, 2010 GMC Savana, 2010 Chevrolet RV Cutaway, and 2010 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the traction control switch.
  2. Test for infinite resistance between the signal terminal F and the ground terminal C with the switch in the open position.
    • If not the specified value, replace the traction control switch.
  3. Test for less than 3 ohms between the signal terminal F and the ground terminal C with the switch in the closed position.
    • If greater than the specified range, replace the traction control switch.
scientia non olet · About LEMON Manuals