LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LS, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component, or Spring Replacement >> Assembly Procedure

Assembly Procedure

    Fig 1: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  1. Install the front spring and front suspension strut mount (2) to the CH 6066:  compressor (1).
  2. Using the CH 6066:  compressor (1), compress the front spring (2).
  3. Hand tighten the front suspension strut nut.
    4. Fig 2: View Of TORX® Bit And CH 35669 Wrench
    GM2452042Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
    NOTE: Use the proper size TORX® bit, hold the strut shaft.
  4. Using the CH 35669:  wrench (2) and the TORX® bit (1), tighten the front suspension strut nut to 70 N.m (52 lb ft)  .
  5. Remove the front suspension strut from the CH 6066:  compressor.
  6. Install the front suspension strut to the vehicle. Refer to Strut Assembly Replacement .
scientia non olet · About LEMON Manuals