LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Instrument Panel Inflatable Restraint Module Replacement >> Removal Procedure

Removal Procedure

    WARNING: Refer to SIR Inflator Module Handling and Storage Warning .
    WARNING: Refer to SIR Warning .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement .
  3. Remove the connector position assurance (CPA) from the I/P module harness connector.
  4. Disconnect the pigtail connector from the I/P module.
    5. Fig 1: View Of SIR Module, Bracket & Retaining Nuts
    GM1226225Courtesy of GENERAL MOTORS CORP.
  5. Remove the mounting fasteners (3) from the I/P module.
  6. Remove the I/P module (1) from the bracket (2).
  7. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflatable Restraint Module Handling and Scrapping .
scientia non olet · About LEMON Manuals