LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.8L, 5.3L, 6.0L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Fig 1: Chassis Wiring Harness Electrical Connector And Fuel Pump Flow Control Module
    GM1931044Courtesy of GENERAL MOTORS CORP.

    Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the chassis wiring harness electrical connector (2) from the fuel pump flow control module (1).
    3. Fig 2: Fuel Pump Flow Control Module And Bolts
    GM1931045Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel pump flow control module bolts (1).
  4. Remove the fuel pump flow control module (2) from the frame.
scientia non olet · About LEMON Manuals