LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement

Theft Deterrent Module Replacement

Fig 1: Theft Deterrent Module
GM1699383Courtesy of GENERAL MOTORS CORP.
Theft Deterrent Module Replacement

Callout Component Name

Preliminary Procedure

  1. Disable the SIR. Refer to SIR Disabling and Enabling .
  2. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
1 Theft Deterrent Module Assembly

Procedure

  1. Pull the theft deterrent module out away from lock cylinder case and disconnect the electrical connector.
  2. Refer to Control Module References for programing and setup of the theft deterrent control module after replacement.
scientia non olet · About LEMON Manuals