LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Chevy Express G2500, Van Cargo Extended, 6.6 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Interior Trim System And Paneling) >> Repair Instructions >> Engine Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 GMC Savana Special, 2010 GMC Savana Camper Special, 2010 GMC Savana, 2010 Chevrolet RV Cutaway, and 2010 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Cover & Retainers
    GM859479Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:
    • Ensure that the engine cover sealing strip is properly seated between the engine cover and the vehicle.
    • Install the cover by pushing directly forward until the seal is properly seated to avoid contact between the cover and the engine components beneath the cover.
  1. Install the engine cover to the vehicle (2).
  2. Install the engine cover retainers (1, 3).
  3. Install the left knee bolster. Refer to Driver Knee Bolster Replacement .
  4. Install the right knee bolster. Refer to Passenger Knee Bolster Replacement .
  5. Install the instrument panel lower extension, if equipped. Refer to Instrument Panel Extension Replacement .
  6. Install the front passenger seat. Refer to Driver or Passenger Seat Replacement .
scientia non olet · About LEMON Manuals