Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 GMC Savana Special, 2010 GMC Savana Camper Special, 2010 GMC Savana, 2010 Chevrolet RV Cutaway, and 2010 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the passenger seat from the vehicle. Refer to Driver or Passenger Seat Replacement .
- Pull the carpet back to gain access to the sensor.
- Remove the nuts (2) from the yaw rate sensor and lateral accelerometer.
- Disconnect the electrical connector (3) from the yaw rate sensor/lateral accelerometer.
- Remove the yaw rate sensor and lateral accelerometer (1) from the vehicle.