Theft Deterrent Module Scan Tool Information
Theft Deterrent Module Scan Tool Information
| Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition is ON, engine OFF, and vehicle is stationary | |||
| Battery Reconnect | - | Yes | The scan tool displays Yes or No to indicate a battery reconnect. This is used for substitution detection to determine if a check needs to be made for substituted parts. |
| - | No | ||
| Engine Start Disabled | Engine start disable activated | Yes | The scan tool displays Yes or No to indicate if the engine start disable has been activated or not. |
| Engine start disable deactivated | No | ||
| Ignition Voltage Status | Ignition voltage present | Active | The scan tool displays Active or Inactive to indicate if the ignition voltage is present or not. |
| Ignition voltage not present | Inactive | ||
| Immobilisation | Immobilisation activated | Active | The scan tool displays Active or Inactive to indicate the status of the immobilisation. |
| Immobilisation deactivated | Inactive | ||
| Immobiliser Status | - | Asleep | The scan tool displays the current state of the immobiliser system. |
| - | Wakeup | ||
| - | Normal | ||
| - | Learn Key | ||
| - | Tamper | ||
| - | Monitor Key | ||
| - | Fail Pending | ||
| - | Fail Enabled | ||
| - | Lrn Keys Stdby | ||
| - | Learn More Keys | ||
| - | Learn Pending | ||
| - | Learn Next Ign | ||
| - | Learn | ||
| - | Learn Complete | ||
| - | No Coded Key | ||
| - | Check Second Key | ||
| - | VIN Check | ||
| - | Subs Detected | ||
| - | Immobilized | ||
| - | Immo Bypass | ||
| - | Immo Bypass Comp | ||
| Immobiliser Telltale | Security indicator illuminated | On | The scan tool displays the current state of the security indicator. |
| Security indicator not illuminated | Off | ||
| Security indicator flashing | Flashing | ||
| Immobiliser DTC | Immobiliser DTC set | Present | The scan tool displays Present or Not Present to indicate an immobiliser DTC is set. |
| Immobiliser DTC not set | Not Present | ||
| Invalid Transponder Key Code | Invalid transponder key detected | Yes | The scan tool displays Yes or No to indicate if a invalid transponder key is detected or not. |
| Valid transponder key detected | No | ||
| Substitution Detection | No substitution detected | Passed | The scan tool displays Passed or Failed for the substitution detection system. |
| Substitution detected | Failed | ||
| System Power Mode | Ignition is in OFF position | Off | This parameter displays Off/Accessory/Run/Crank/Invalid. This is the status of the system power mode dependent on the ignition position. |
| Ignition is in ACC position | Accessory | ||
| Ignition is in RUN position | Run | ||
| Ignition is in CRANK position | Crank | ||
| Ignition position is unknown | Invalid | ||
| Tamper Status | Tamper state activated | Active | The scan tool displays whether the theft module is in the tamper state. |
| Tamper state deactivated | Inactive | ||
| Transponder Key ID Error | Key ID does not match the theft module | Yes | The scan tool will display Yes if the key ID does not match the theft module. |
| Key ID does match the theft module | No | ||
| Transponder Key Number | - | 1 | The scan tool displays 1/2/3/4. depending on what key is in the ignition. |
| - | 2 | ||
| - | 3 | ||
| - | 4 | ||
| Transponder Keys Programmed | - | 1/2/3/4 | The scan tool displays the number of transponder keys programmed. |
| Valid Transponder Key | Valid transponder key present | Yes | The scan tool displays Yes if a valid transponder key is present. |
| Invalid transponder key present | No | ||
| VIN Message Received | VIN message received | Yes | The scan tool displays Yes or No to indicate whether a VIN message has been received or not. |
| VIN message not received | No | ||
| VIN Valid | Valid VIN | Yes | The scan tool displays Yes or No to indicate when a VIN is valid or not. |
| Invalid VIN | No | ||
| Wrong Transponder Key | Wrong transponder key used | Yes | The scan tool displays Yes or No to indicate if the wrong transponder key is used or not. |
| Correct transponder key used | No | ||