Adjustment Procedure
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Before performing any adjustment affecting the wheel alignment, refer to Wheel Alignment Measurement .
- Loosen the strut to the knuckle bolts. Refer to Strut Assembly Replacement .
- Adjust the front camber (1) and tighten the strut-to-knuckle nuts to 80 N.m (59 lb ft) plus 180 degrees.
- Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
CAUTION:
Refer to Fastener Caution
.
NOTE:
After adjusting the front camber, it is necessary to adjust the front toe.