LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Controls And Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  3. Fig 1: View Of Throttle Body Electrical Connector
    GM945417Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Disengaging Connectors Caution .
  4. Remove the throttle body electrical connector.
  5. Fig 2: View Of Wiring Harness Conduit
    GM1285256Courtesy of GENERAL MOTORS CORP.
  6. Unlock and reposition the wiring harness conduit.
  7. Fig 3: View Of Throttle Body
    GM1285255Courtesy of GENERAL MOTORS CORP.
  8. Remove the throttle body bolts.
  9. Remove the throttle body and gasket.