LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiper System And Washer System) >> Repair Instructions >> Windshield Washer Pump Replacement

Windshield Washer Pump Replacement

WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Windshield Washer Pump
GM2183104Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front driver side wheelhouse panel liner. Refer to Front Wheelhouse Liner Replacement .
  2. Disconnect the windshield washer pump electrical connector.
1 Windshield Washer Pump Hose
Tip:  Disconnect the washer pump hose from the washer pump spout.
2 Windshield Washer Pump

Procedure

  1. Place a clean suitable drain pan under the washer container in order to contain the windshield washer solvent.
  2. Using two medium sized flat-bladed tools, place the tools under the washer pump and pry upward, releasing the washer pump from the washer container filter grommet.
  3. Remove the washer pump filter grommet and discard.
3 Windshield Washer Pump Filter Grommet
Tip:  Install a new washer pump filter grommet upon replacement of the washer pump.