Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: A new sunroof frame does not include the sunroof window or the sunshade as components. You must install the old sunroof window and sunshade to the new sunroof frame.

Remove the sunshade panel. Refer to Sunroof Sunshade Replacement .
Remove the sunroof window. Refer to Sunroof Window Replacement .
It is only necessary to lower the headliner. Only do the steps in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement .
Disconnect the electrical connector to the sunroof actuator/motor.
Disconnect the electrical connector from the sunroof frame.

Fig 1: Sunroof Module Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the front and rear drain hoses (1) from the drain spouts on the sunroof frame. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement .

NOTE: Remove the 2 center bolts last in order to help support the sunroof frame to the roof ring.

Remove the sunroof frame bolts (2) from the roof.
Remove the center bolts from the sunroof frame.
With the aid of an assistant, lower and remove the sunroof frame out through the passenger side door.