Circuit/System Testing
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This system allows you to service each component separately (module and/or sensing mat). Perform a Passenger Presence System Rezeroing whenever a component is replaced. Inspect component connectors for damage or corrosion. Repair or replace the affected component/connector:
- Confirm that all Passenger presence detection system connectors are fully seated.
- Verify DTC B0074 is not set.
- If the DTC is set, replace the B60 passenger presence detection sensor.