Circuit/System Verification
NOTE:
- DTC P2544 is an informational DTC.
- Diagnose all other engine control module DTCs prior to DTC P2544.
- Verify there are no other engine control module or communication DTCs set.
- If a DTC is set
- If a DTC is not set
- Complete the diagnosis by looking for an intermittent CAN circuit fault. Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device
.
- If an intermittent CAN circuit fault is found
Repair as necessary.
- If an intermittent CAN circuit fault is not found
- If an intermittent CAN circuit fault is found
- All OK.