LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.0L - DTC Diagnostics And Troubleshooting >> Diagnostic Information and Procedures >> DTC P0341 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition OFF, inspect the engine wiring harness carrying the camshaft position sensor circuits for the following conditions:
    • Close routing of aftermarket electrical equipment
    • Close to solenoids, motors, and relays.
    • If any of these are determined to be a possible source of electrical interference, correct any wire harness routing or component placement conditions.
  2. Engine idling, observe the scan tool Intake and Exhaust Camshaft Position Active Counter parameters. Both parameters should be incrementing.
  3. Engine idling, observe the DTC information with a scan tool. DTC P0341 or P0366 should not set.
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals