LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Shield Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Battery Disconnect Warning .

  1. Disconnect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
    2. WARNING:

    To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

    WARNING:

    Refer to Safety Glasses Warning .

  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the right catalytic converter from the vehicle. Refer to Catalytic Converter Replacement - Right Side .
    4. Fig 1: Identifying Heat Shield To Starter Motor Retaining Bolts
    GM1951065Courtesy of GENERAL MOTORS CORP.
  4. Remove the heat shield to starter motor retaining bolts (1).
  5. Remove the heat shield (2) from the vehicle.
scientia non olet · About LEMON Manuals