LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows >> Repair Instructions >> Quarter Window Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Body Retaining Nuts And Quarter Window Seal
    GM2536073Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Inspect the quarter window seal (3) for excessive wear and/or damage. Replace if necessary.

  1. Install the quarter window (2) to the vehicle.
  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the quarter window to body retaining nuts (1) and tighten to 3 N.m (27 lb in).
  4. Install the centre pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  5. Install the front and rear side door outer opening frame upper reveal molding. Refer to Front and Rear Side Door Outer Opening Frame Upper Reveal Molding Replacement .