LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Repair Instructions >> Turn Signal Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Turn Signal Switch
    GM1947048Courtesy of GENERAL MOTORS CORP.
  1. Install the new turn signal switch (1) and push the switch into position until the retaining tabs (2) seat with an audible click.
    2. Fig 2: Electrical Connector
    GM1947050Courtesy of GENERAL MOTORS CORP.
  2. Connect the turn signal switch (2) electrical connectors (1).
  3. Install the upper and lower steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  4. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
  5. Check all vehicle lights for correct operation.
scientia non olet · About LEMON Manuals