LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Camaro SS, 2D Convertible, 6.2 W >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Quick Connect Fitting, EVAP Line, Fuel Filler Tube & Hose
    GM2121477Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel filler tube (7) to the vehicle.
  2. Connect the fuel filler tube (3) to the fuel filler hose (5).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the retaining hose clamp (4) the fuel filler tube hose clamp (3) to 3.5 N.m (31 lb in).
    4. NOTE: Listen for an audible click to confirm correct installation.
  4. Connect the evaporative emission (EVAP) line (2) to the quick connect fitting (1).
  5. Install the filler tube to chassis retaining bolts (6) and tighten to 9 N.m (80 lb in).
  6. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  7. Install the right rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
  8. Install the right rear wheel. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals