LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Camaro LT, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pipe Shield Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cross vehicle brace.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front .
  3. Remove the intake manifold insulator.
    4. Fig 1: Intake Manifold & Cylinder Bolts
    GM1977749Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel pipe shield to intake manifold bolts (1).
  5. Remove the fuel pipe shield to cylinder bolt (1).
  6. Carefully remove the fuel pipe shield from the vehicle. Take care not to damage the insulation behind the shield.
scientia non olet · About LEMON Manuals