LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Camaro LT, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Locating CKP Electrical Connector
    GM887868Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the crankshaft position (CKP) electrical connector (3).
    3. Fig 2: Identifying Crankshaft Position (CKP) Sensor
    GM1311144Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft sensor bolt.
  4. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals