LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Aveo LT, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Repair Instructions >> Daytime Running Lamp Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Daytime Running Lap Module and Bolts
    GM1248415Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the daytime running lamp module with the bolts and tighten to 2.5 N.m (22 lb in).
  2. Connect the electrical connector.
  3. Install the instrument panel lower cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals