Windshield Wiper Arm Replacement (Traverse)

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Wiper Arm (Traverse)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Windshield Wiper Arm Finish Cap (Qty: 2)
2	Windshield Wiper Arm Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 25 N.m(18 lb ft)
3	Windshield Wiper Arm Assembly Procedure Clean the knurls on the wiper motor pivot shaft after the wiper arm has been removed. Hold and align the tips of the front wiper blades to the paint dots on the windshield while securing the nut. Perform a wet wipe and re-check the alignment, adjust if needed.

Callout

Component Name

Windshield Wiper Arm Finish Cap (Qty: 2)

Windshield Wiper Arm Nut (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 25 N.m(18 lb ft)

Windshield Wiper Arm Assembly

Procedure

Clean the knurls on the wiper motor pivot shaft after the wiper arm has been removed.
Hold and align the tips of the front wiper blades to the paint dots on the windshield while securing the nut.
Perform a wet wipe and re-check the alignment, adjust if needed.