LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Switch Bracket Replacement

Turn Signal Switch Bracket Replacement

Fig 1: Identifying Turn Signal Switch Bracket
GM1867032Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement .
1 Turn Signal Switch Bracket Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)
2 Turn Signal Switch Bracket

Procedure

  1. Disconnect any electrical connectors as needed.
  2. Release the plastic retaining tabs to release the turn signal switch bracket from the steering column.
scientia non olet · About LEMON Manuals