Liftgate Trim Panel Replacement (Traverse)

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Liftgate Trim Panel (Traverse)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate window garnish molding. Refer to Liftgate Garnish Molding Replacement (without TB4) or Liftgate Garnish Molding Replacement (with TB5) .
1	Liftgate Inside Pull Handle Cover
2	Liftgate Trim Finish Panel Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
3	Liftgate Trim Finish Panel Push Pin Retainer (Qty: 2)
4	Liftgate Trim Finish Panel Retainer (Qty: 6)
5	Liftgate Trim Finish Panel Assembly Procedure Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly. Disconnect the electrical connector, if equipped.