LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Battery Disconnect Warning .

  1. Remove the floor matt from between the front and middle row passenger seat, if equipped.
    2. Fig 1: Identifying Battery Cover Screw & Cover
    GM1860911Courtesy of GENERAL MOTORS CORP.
  2. Record all of the customers radio station presets.
  3. Turn OFF all the lamps and accessories.
  4. Ensure the ignition switch is in the OFF position and the key is removed.
  5. From inside the vehicle, remove the battery cover screw and cover.
    6. Fig 2: View Of Negative Battery Cable Terminal & Nut
    GM1860912Courtesy of GENERAL MOTORS CORP.
  6. Loosen the negative battery cable terminal (1) nut.
  7. Remove the negative battery cable from the battery negative terminal (2).
  8. Reposition the negative battery cable away from the battery negative terminal.
scientia non olet · About LEMON Manuals