Coolant Recovery Reservoir Replacement

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coolant Recovery Reservoir

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the coolant from the recovery reservoir. Remove the front compartment sight shield if necessary. Refer to Front Compartment Sight Shields Replacement (Acadia) or Front Compartment Sight Shields Replacement (Enclave) or Front Compartment Sight Shields Replacement (OUTLOOK) or Front Compartment Sight Shields Replacement (Traverse)
1	Coolant Recovery Reservoir Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 5 N.m (44 lb in)
2	Coolant Recovery Reservoir Procedure: Remove overflow hose from reservoir

Callout

Component Name

Preliminary Procedure

Drain the coolant from the recovery reservoir.
Remove the front compartment sight shield if necessary. Refer to Front Compartment Sight Shields Replacement (Acadia) or Front Compartment Sight Shields Replacement (Enclave) or Front Compartment Sight Shields Replacement (OUTLOOK) or Front Compartment Sight Shields Replacement (Traverse)

Coolant Recovery Reservoir Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 5 N.m (44 lb in)

Coolant Recovery Reservoir
Procedure:
Remove overflow hose from reservoir