LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Fixed & MOVEABLE Window System) >> Repair Instructions >> Front Side Door Window Channel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Weatherstrip/Run Channel & Bolts
    GM1843993Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip/run channel (2) to the door.
  2. Position the tabs on the weatherstrip/run channel into the slots in the door.
  3. Press the weatherstrip/run channel into the window frame opening.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the retaining bolts (1).

    Tighten:  Tighten the retaining bolts to 10 N.m (88 lb in).

  5. Install the door speaker. Refer to Radio Front Side Door Speaker Replacement .
  6. Install the window. Refer to Front Side Door Window Replacement .
  7. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  8. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Traverse) or Front Side Door Trim Panel Replacement - Left Side (Acadia) or Front Side Door Trim Panel Replacement - Left Side (Enclave) or Front Side Door Trim Panel Replacement - Left Side (OUTLOOK) or Front Side Door Trim Panel Replacement - Right Side (Traverse) or Front Side Door Trim Panel Replacement - Right Side (Acadia) or Front Side Door Trim Panel Replacement - Right Side (Enclave) or Front Side Door Trim Panel Replacement - Right Side (OUTLOOK) .
scientia non olet · About LEMON Manuals