Rocker Panel Extension Molding Replacement
WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rocker Panel Extension Molding Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2.5 N.m (22 lb in) |
| 2 | Rocker Panel Extension Molding Bolt Tighten: 5.0 N.m (44 lb in) |
| 3 | Rocker Panel Extension Molding Assembly Tip: Position the top edge of the molding under the front bottom edge of the rear wheelhouse panel prior to installing the screws. |