LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System & Fuel System - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement - Fuel Feed Pipe

Fuel Pressure Sensor Replacement - Fuel Feed Pipe

Fig 1: Identifying Fuel Pressure Sensor
GM2149050Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
1 Fuel Pressure Sensor
CAUTION: To avoid fuel system contamination clean the area where the sensor connects to the fuel line or fuel injection fuel rail before removing the sensor.

Procedure: 
Disconnect the electrical connector.