LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Malibu Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

CAUTION: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
    Fig 1: View Of Engine Wiring Harness Electrical Connectors
    GM1889684Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill-LY7, LZE, LZ4) or Cooling System Draining and Filling (GE 47716) .
  2. Disconnect the engine wiring harness electrical connector (1) from the engine coolant temperature (ECT) sensor (2).
    3. Fig 2: Identifying ECT Sensor & Thermostat Housing
    GM1889685Courtesy of GENERAL MOTORS CORP.
  3. Remove the ECT sensor (1) from the thermostat housing.
scientia non olet · About LEMON Manuals