LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Malibu Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Crankshaft Position (CKP) Sensor & Connector
    GM1890116Courtesy of GENERAL MOTORS CORP.
  1. Remove the starter. Refer to Starter Replacement (LAT) or Starter Replacement (LE5 or LE9) or Starter Replacement (LZ4 or LZE) .
  2. Disconnect the engine wiring harness electrical connector (1) from the crankshaft position (CKP) sensor.
    3. Fig 2: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
scientia non olet · About LEMON Manuals