LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Lighting System) >> Repair Instructions >> Headlamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Halogen Bulb Warning .
CAUTION: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.
  1. Ensure that the headlamp switch is in the OFF position.
  2. Ensure that the ignition switch is in the LOCK position.
  3. Remove the front grille. Refer to Grille Replacement .
  4. Remove the bolts that retain the headlamp.
    5. Fig 1: View Of Park Lamp, High Beam Headlamp, Low Beam Headlamp, & Front Side Marker Bulb
    GM1386214Courtesy of GENERAL MOTORS CORP.
  5. Push and rotate the high beam headlamp (2), low beam headlamp (3) 1/4 turn counterclockwise in order to remove the bulb, if needed.
  6. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals