LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Lighting System) >> Repair Instructions >> Door Jamb Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Door Jamb Switch
    GM1415019Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the door jamb switch (1).
  2. Install the door jamb switch (1) to the body.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the screw retaining the door jam switch to the body.

    Tighten:  Tighten the door jamb switch screw to 1.5 N.m (13 lb in).

  4. Close the door.
scientia non olet · About LEMON Manuals