LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Power Door Lock System And Release Systems) >> Repair Instructions >> Latch Control Assembly Replacement Rear Side Access Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear side access door.
  2. Remove the rear side access door trim panel. Refer to Rear Side Access Door Trim Panel Replacement .
  3. Remove the rear side access door latch control handle. Refer to Rear Side Access Door Inside Handle Replacement .
    4. Fig 1: View Of Latch Control Assembly
    GM1252376Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the upper latch rod (1) from the control assembly by releasing the retaining clip (2).
  5. Disconnect the lower latch rod from the control assembly by releasing the retaining clip (3).
  6. Remove the bolts retaining the latch control assembly from the rear side access door.
  7. Remove the latch control assembly from the rear side access door.
scientia non olet · About LEMON Manuals