LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Wiper System And Washer System) >> Repair Instructions >> Windshield Washer Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new hose to the vehicle.
  2. Remove the cap from the washer pump outlet and install the new hose to the outlet of the pump.
    3. Fig 1: View Of Washer Nozzles & Air Inlet Panel
    GM1272650Courtesy of GENERAL MOTORS CORP.
  3. Position the hose (1) to the air inlet panel (4).
  4. Secure the hose to the air inlet grille panel.
  5. Connect the hose to the washer nozzles. Refer to Washer Nozzle Replacement .
  6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  7. Top off the washer solvent container with washer solvent.
  8. Close the hood.
scientia non olet · About LEMON Manuals