LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Controls And Fuel - 3.7L - Repair Instructions) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of MAP Sensor
    GM1352008Courtesy of GENERAL MOTORS CORP.
  1. Lightly lubricate the MAP sensor seal with clean engine oil, to aid in installation.
  2. Install the MAP sensor (2) into the intake manifold (3).
  3. Install the MAP sensor retainer (1).
    4. Fig 2: MAP Sensor, MAP Sensor Connector, Brake Booster Hose And Crankcase Vent Hose
    GM1350689Courtesy of GENERAL MOTORS CORP.
  4. Connect the MAP sensor electrical connector (3).
scientia non olet · About LEMON Manuals