LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR SS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Gasoline/Gasoline Vapors Warning .
    Fig 1: Fuel Tank Filler Pipe
    GM1637027Courtesy of GENERAL MOTORS CORP.
  1. Drain the fuel tank. Refer to Fuel Tank Draining (Non E-85) .
  2. Remove the fuel fill pipe to fill pipe housing bolts.
  3. Remove the fuel fill pocket. Refer to Fuel Tank Filler Pipe Housing Replacement .
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    5. Fig 2: Fuel Fill Pipe Lower Bolt
    GM1636691Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel fill pipe lower bolt.
    6. Fig 3: Fuel Tank Vent Pipe Quick Connect Fittings
    GM1636704Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the fuel tank vent pipe quick connect fittings (1, 3). Refer to Plastic Collar Quick Connect Fitting Service .
  7. Loosen the fuel fill pipe hose clamp (2) at the fuel tank.
  8. Remove the fuel fill pipe hose from the fuel tank.
    9. Fig 4: Fuel Fill Pipe
    GM1636690Courtesy of GENERAL MOTORS CORP.
  9. Remove the fuel fill pipe from the vehicle.
scientia non olet · About LEMON Manuals