LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR LS, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component, or Spring Replacement >> Disassembly Procedure

Disassembly Procedure

  1. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
    2. Fig 1: Compressing/Releasing Lower Part Of Shock Spring
    GM743246Courtesy of GENERAL MOTORS CORP.
  2. Install the strut (2) in the J 45400  (1). See Special Tools .
    3. NOTE: The spring is compressed when the strut moves freely.
  3. Turn the spring compressor forcing screw until the coil spring is compressed.
    4. Fig 2: Removing/Installing Strut Retaining Nut
    GM1079158Courtesy of GENERAL MOTORS CORP.
  4. Using a TORX® socket and a strut rod socket, remove the upper strut mount nut.
    5. Fig 3: Compressing Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  5. Remove the upper strut mount and the coil spring from the J 45400  . See Special Tools .
  6. Remove the strut (2) from the J 45400  . See Special Tools .
scientia non olet · About LEMON Manuals