LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Sunroof, Housing And Adjusting Screws
    GM468350Courtesy of GENERAL MOTORS COMPANY
  1. Position the sunroof window into the opening.
  2. Ensure that the window trade mark is to the rear of the opening and that sunroof window attachment tabs are to the inboard side of the mounting arms.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the sunroof window screws (1) to the window. Do not tighten the screws.

    Tighten 

    Tighten the screws to 6 N.m (53 lb in).

  4. Carefully close the sunroof window (3) from the vent position to the full closed position.
  5. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
  6. Install the sunroof panel side opening closeout covers. Refer to Sunroof Panel Side Opening Closeout Cover Replacement .
  7. Close the sunshade.
  8. Cycle the sunroof window to ensure proper operation and fit.
scientia non olet · About LEMON Manuals