LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Equinox LS, FWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Dust Warning .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the wheel speed sensor electrical connector.
    4. Fig 1: Front Brake Hose Bracket Nut
    GM2249464Courtesy of GENERAL MOTORS CORP.
  4. Remove the front brake hose bracket nut (1).
  5. Release the front wheel speed sensor harness from the retainers on the front brake hose.
    6. Fig 2: Wheel Speed Sensor Bolt
    GM2249467Courtesy of GENERAL MOTORS CORP.
  6. Remove the wheel speed sensor bolt (1).
    7. Fig 3: Wheel Speed Sensor
    GM2249468Courtesy of GENERAL MOTORS CORP.
  7. Remove the wheel speed sensor (1) by pulling the sensor straight upward from the steering knuckle.
scientia non olet · About LEMON Manuals