LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cutaway 6.6 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 1931 (Power Door Lock System And Release Systems) >> Repair Instructions >> Rear Door Latch Control Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Savana and 2011 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lock Rods & Left Side Rear Door Latch Handle
    GM334092Courtesy of GENERAL MOTORS CORP.
  1. Install the rear door latch control (4) to the vehicle.
  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the two nuts (2) that retain the rear door latch control (4) to the rear door, left side and tighten to 11 N.m (97 lb in).
  4. Install the lock rods (1, 3) to the rear door latch control (4), left side.
  5. Install the rear door trim panel, left side. Refer to Rear Door Trim Panel Replacement - Left Side (E24) .