Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 GMC Savana Special, 2011 GMC Savana Camper Special, 2011 GMC Savana, 2011 Chevrolet RV Cutaway, and 2011 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lamp assembly to the bumper.
- Install the nut to the lamp and tighten to 2 N.m (18 in lb).
- Connect the electrical connector to the lamp assembly.
CAUTION:
Refer to Fastener Caution .