LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cutaway 6.6 L >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows System >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Component Testing >> Passenger Window Switch

Passenger Window Switch

  1. Ignition OFF, disconnect the harness connector at the passenger window switch.
  2. Test for infinite resistance between the control terminals G and F and the B+ terminal A with the switch in the INACTIVE position.
    • If less than the specified value, replace the window switch.
  3. Test for less than 2 Ω between the control terminal G and the B+ terminal A with the switch in the UP position.
    • If greater than the specified range, replace the window switch.
  4. Test for less than 2 Ω between the control terminal F and the B+ terminal A with the switch in the DOWN position.
    • If greater than the specified range, replace the window switch.
scientia non olet · About LEMON Manuals