LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC B1328 >> Circuit/System Verification

Circuit/System Verification

  1. Engine running measure and record the voltage at the battery terminals. The battery voltage is 12.6-15.5 V.
  2. Observe the appropriate control module scan tool Battery Positive Voltage parameter. The reading should be between 12.6 and 15.5 V.
    • If not within the specified range, replace the appropriate control module.
scientia non olet · About LEMON Manuals