LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Lock Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Lock Module
    GM1400454Courtesy of GENERAL MOTORS CORP.
  1. Install the control module to the retaining bracket on the steering column.
  2. Connect the electrical connector to the lock module.
    3. Fig 2: Steering Column Electronic Lock Harness
    GM1400455Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P Assembly. Refer to Instrument Panel Assembly Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
  5. Program the lock control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals