LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement

Ignition Coil Replacement

Fig 1: Ignition Coil
GM1969222Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LS3) or Battery Negative Cable Disconnection and Connection (LS7 or LS9) .
  2. Remove the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (LS9) or Upper Intake Manifold Sight Shield Replacement (w/o LS9) .
1 Ignition Coil Bolt
CAUTION: Refer to Fastener Caution .

Tighten:  12 N.m (106 lb in)
2 Ignition Coil

Procedure

  1. Disconnect the electrical connector.
  2. Disconnect the ignition cable.
scientia non olet · About LEMON Manuals